This site is being totally reconstructed some pages may be obsolete or missing. For our current complete listings, see our online webstore.
Northern Arizona Wind & Sun Logo

Shurflo 9300 Submersible Well pump


Home >> Product Catalog >> Solar Water Pumping >> Shurflo Pumps >> Shurflo 9300

Shurflo 9300 submersible. .9 to 2 gpm, depths to 225 feet

Shurflo 9300 solar pumpShurflo's 9300 pumps are backed by 25 years of research and engineering experience. Designed to be strong and yet lightweight, these pumps are easily repaired in the field. We have all repair and accessory parts available. Over the years we have sold hundreds of these, and it is one of our most popular submersible well pumps. In many areas of the US a complete solar water pumping system will cost under $2,000 if your water is 225 feet or less.

Typical applications include drip irrigation, stock and wildlife watering, remote homes and cabins. The most common use is for remote homes and stock watering. Quite a few of the 9300's that we sell are replacing windmills, as the price of a complete pumping system is often cheaper than buying or repairing the windmill head.

For all but very shallow wells, a pump controller should be used, or you can buy the complete kit which includes the 902-200 Shurflo controller.

Features:

  • Water blocked electrical connector.
  • Quick disconnect - no splicing needed.
  • Accepts a variety of jacketed cables.
  • Strong, yet lightweight - only 6 pounds.
  • Corrosion proof housing with stainless-steel fasteners.
  • Dry running capability without pump damage.
  • Internal bypass feature for pump protection.
  • Long life, 24 volt DC operation.
  • Easily repaired in the field.

Go to parts diagramGo here for a parts diagram and repair parts

 

We have listed our repair parts on another page as it has some larger picture files that might take a little while to load.

9300 Flow Chart

9300 flow chart

 

Technical Specifications:

Pump design: Positive displacement 3 chamber diaphragm pump
Cam: 3 degree
Motor: Permanent magnet, thermally protected, 24 volts DC, 4.1 amps maximum. (P/N 11-175-00)
Internal bypass:105-110 PSI
Maximum lift: 230 feet (70 meters)
Maximum submersion: 100 feet (30 meters)
Outlet port: 1/2" (12.7 mm) barbed fitting for 1/2" ID tubing
Inlet: 50 mesh stainless steel screen
Net weight: 6 pounds (2.7 Kg)
Dimensions: 3.75" (95mm) x 12" (305mm)
Model #: 9325-043-101

[Footer.htm]
[Linkbot.htm]